Grace Design m201mk2 2-channel Microphone Preamp

Grace Design m201mk2 2-channel Microphone Preamp Features:

• Extracts maximum performance from every mic in your locker

• Proprietary Ribbon Mode optimizes ribbon mic performance

• Enormous headroom, ultra-wide bandwidth:

• 3.2Hz–530kHz (± 3dB, 150Ω source, 20dB gain)

• 14.8Hz–109kHz ( ± 0.2dB, 150Ω source, 20dB gain)

• 3.2Hz–500kHz (± 3dB, 150Ω source, 40dB gain)

• 15.4Hz–103kHz ( 0.2dB, 150Ω source, 40dB gain)

• Ultra-low harmonic distortion (THD+NP):

• At 20dB gain +20dBu out, 1kHz: <.0008%

• At 40dB gain +20dBu out, 1kHz: <.0009%

• At 60dB gain +20dBu out, 1kHz: <.0070%

• Ultra-low Intermodulation distortion:

• SMPTE/DIN 1:1 (50Hz, 7kHz): <.0007%

• SMPTE/DIN 4:1 (50Hz, 7kHz): <.009%

• Noise (referred to input):

• At 60dB gain, 50Ω source 22-22kHz: -130dB

• At 60dB gain, 150Ω source 22-22kHz: -127dB

• Phase deviation:

• At 40dB gain 40Ω source 75Hz-45kHz: <3°

• Crosstalk:

• Any Channel @40dB gain, 1kHz: -140dB

• Any Channel @40dB gain, 10kHz: -130dB

• CMMR:

• At 60dB gain, 3.5Vcm, 1KHz: >85dB

• At 60dB gain, 3.5Vcm, 10KHz: >75dB

• Switchable phantom power:

• Voltage +48V: ±1.0V

• 6.8kΩ resistor match tolerance: ±0.1%

• Maximum Output Level: 1kHz, 100KΩ load: +28dBu

• Impedance:

• Input Nominal: 8100Ω

• Input Ribbon Mode: 20KΩ

• Input Pad Engaged: 1.3KΩ

• Output: 150Ω

• Power Consumption

• 100-240VAC 50/60Hz: 10 Watts max

• Polarity invert; 20dB pad

• Rear-panel, per-channel I/O: 1 XLR Mic input, 2 XLR line outputs

• 1U 19" rackmount chassis